beautypg.com

Finishing chopper reel installation (option) – Landoll 2410F Weatherproofer I User Manual

Page 47

background image

ASSEMBLY INSTRUCTIONS

3-31

Finishing Chopper Reel
Installation (Option)

NOTES

Refer to Figure 3-21 for hydraulic diagram.

See Figure 2-5 for finishing chopper reel placement
dimensions.

1.

Attach reel arm assemblies to rear frame in second
hole from top using 1-8 x 7-1/2 hex head cap screw,
5” pivot bushing, and hex lock nut (See Figure 3-23.)

2.

Attach reel arms w/ extension assemblies to rear
frame using 1-8 x 7-1/2 hex head cap screws and
hex lock nuts.

3.

Attach 17” spring assembly and 2-1/2 hydraulic
cylinder to lower hole on rear frame using cylinder
trunnion, cylinder trunnion stop, 1/2-13 x 2-1/4 hex
head cap screw, and split lock washer.

4.

Install the manifold to the manifold bracket on the
frame using 1/2-13 x 3-1/2 hex head cap screws and
hex lock nuts.

5.

Install fittings into manifold according to Figures 3-21
thru 3-22.

6.

Install hoses per Figures 3-21 thru 3-22.

7.

Install steel plugs in any remaining open manifold or
valve ports.

8.

Attach chopper reel/gang bar assembly to reel arm
assemblies using gang bar mount plates, 3/4-10 x 6
hex head cap screws, and double hex lock nuts.