Landoll 7431 VT Plus User Manual
Page 53
ASSEMBLY INSTRUCTIONS
3-29
Figure 3-23: LED Light and SMV Harness Wire Designations (After August, 2013)
LED Light and SMV Bracket
Installation (After August, 2013)
NOTE
Refer to pages 2-7 thru 2-16 for light bracket
placements.
1.
Attach left and right light brackets with reflectors to
center frame using u-bolts and hex lock nuts (See
Figure 3-22.)
2.
Attach ag amber single LED lamps to light brackets
using 1/4-20 x 1-1/4 hex head cap screws and hex
lock nuts.
3.
Attach left tail light mount to frame assembly using
u-bolt and 5/8-11 flange head serrated nuts.
4.
Attach right tail light mount and ag flasher control
module to frame assembly using u-bolt and 5/8-11
flange head serrated nuts. Be sure that the control
module is set so that the 6 pin connector faces the
right side of the machine.
5.
Attach the ag red single LED lamps to tail light
mounts using 1/4-20 x 1-1/4 hex head cap screws
and hex lock nuts.
IMPORTANT
Make sure lights are positioned for maximum
visibility from the rear.
6.
Install the rear warning light harness to the frame.
Connect 2 pin and 3 pin ends to each of the warning
lights. Connect 6 pin to the ag flasher control module.
See Figure 3-23 for LED harness wire
designations.
7.
Attach front warning harness to frame. Connect 4 pin
end to the ag flasher control module.
8.
Insure that the harnesses are clear of any moving
parts and secure the harnesses with tie wraps
provided.
9.
Install the stor-away holder to hose holder on hitch
with 1/4-20 x 3/4 hex head cap screws and hex lock
nuts.
10. Attach SMV emblem and mounting bracket to rear
center frame bar using u-bolt, 1/4-20 x 3/4 hex head
cap screws, and hex lock nuts. The SMV sign should
be centered on the back bar of the frame.
m177034 elect wire designations op
7-PIN
CONN
1
2
3
4
5
6
7
D
B
A
C
GROUND
WORK LAMPS
LEFT FLASHING
& TURN
STOP LAMPS
RIGHT FLASHING
& TURN
TAIL LAMPS
SWITCHED
POWER (12V)
4-PIN
TOWER
GROUND
BLACK
YELLOW
RED
GREEN
BROWN
BLUE
CIRCUIT
WIRE
COLOR
BLACK
LEFT TURN
WHITE
GROUND
BROWN
TAIL LIGHT
YELLOW
LEFT TURN
GREEN
RIGHT
RED
RIGHT
TURN
TURN
A
B
C
D
E
F
2-PIN
TOWER
1
2
3
4
5
3-PIN
TOWER
6-PIN
SHROUD
3-PIN
TOWER
2-PIN
TOWER
A
B
A
B
C
C
A
B
A
B
FRONT WARNING
HARNESS
REAR WARNING
HARNESS