Landoll PFT Floating Ring Pulverizer - Manual (Page 11)

298rev401 5K089 Page 9
The safest way to park your pulverizer is to lower it into the operating position, place blocks behind
and in front of the pulverizer wheels, then use the jack to take the weight off the towing implement
and unhitch the machine.
To attach it to equipment, reverse the above procedure. When attaching to a piece of equipment
with a high drawbar, back the equipment near the pulverizer with the hitches in line, then lower the
towing implement as much as you can while still being able to move it, raise the pulverizer drawbar
to the desired height, bring the towing equipment into the final location, attach the pulverizer to the
other machine. Then return both pieces of equipment to their transport position and install transport
locks.
CAUTION Be sure to install the transport lock pin any time the pulverizer
is being pulled or stored in the transport position.
If you must store the pulverizer in the transport position, block the transport wheels, use the
jack to relieve weight from the towing equipment, unhitch the pulverizer, and lower the jack to make
it more stable. Figure 5 shows how and where to install the transport lock pin, and also shows the
storage location for the pin when it is not being used.
FIGURE 5
TRANSPORT
LOCK PIN
PIN STORAGE
HOLE
LUBE
FITTING
LUBE
FITTING