KD Scientific Legato 200 Series - Manual (Page 60)

60
Operating the KDS Legato 200 Series
K
D
S
L
e
g
a
to
2
0
0
S
e
ri
e
s
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
ECHO
Sets or displays the RS232/USB echo state. Valid states
are on or off.
Command format:
echo [on|off]
Query response:
[##:]OFF
[##]
or:
[##:]ON
[##]
FREE
Displays the number of free program steps left on the
disk.
Command format:
free
Query response:
[##:]# steps used
[##:]# steps free
[##:]# total steps
[##]
The number of steps displayed is a four digit number, right
justified, and padded with spaces.
FORCE
Sets or displays the infusion force level in percent. Valid
range is 1 to 100.
Command format:
force [1-100]
Query response:
[##:]#%
[##]
FTSWITCH
Sets or displays the footswitch setting. The footswitch
may be used in a toggle on or off mode (momentary), a
press to run mode (falling), or a release to run mode
(rising).
Command format:
ftswitch [mom|rise|fall]
Query response:
[##:]Momentary
[##]
or:
[##:]Active high
[##]
or:
[##:]Active low
[##]
POLL
Sets or displays the polling mode state. In polling mode,
prompts are inhibited if they aren’t generated by a typed
command. Valid states are on or off.
Command format:
poll [on|off]
Query response:
[##:]OFF
[##]
or:
[##:]ON
[##]
TILT
Calibrates the tilt sensor.
Command format:
tilt
Query response:
[##:]Calibrating the tilt sensor...
[##:]Tilt calibration value is #
[##]
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com