KD Scientific Legato 200 Series - Manual (Page 53)

53
Operating the KDS Legato 200 Series
K
D
S
L
e
g
a
to
2
0
0
S
e
ri
e
s
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
Saving A Copy Of A Program
Follow these instructions to save a copy of a Program
under a new name:
1. From Program Configuration screen, choose the
Program Name button to enter the Mode Selection
screen.
2. From the list of available Programs, select
(press once) the Program you want to save a copy
of, then choose the File Options button to enter the
File Options screen.
3. Choose Save As/Copy to access the Program
Name Entry screen. The current Program Name
will be displayed in the text entry box.
4. On the Program Name screen, type the new name
for your Program using the onscreen keyboard.
Choose the Symbols/Numbers button (.?123) to
display the list of available numbers and symbols
that can be included in the Program Name. To
switch the keyboard back to letters mode, choose
the Letters button (ABC). [15 characters maximum]
5. When finished entering the new Program Name,
choose Accept to save your changes and return to
the File Options screen.
6. Choose to return to the Mode
Selection screen.
‘BACK’
Renaming A Program
Follow these instructions to rename a previously saved
Program:
1. From the Program Configuration screen, choose
the Program Name button to enter the Program
Mode screen.
2. From the list of available Programs, select
(press once) the Program you want to rename, then
choose the File Options button to enter the File
Options screen.
3. Choose Rename Program to access the Program
Name Entry screen. The current Program Name
will be displayed in the text entry box.
4. On the Program Name screen, type the new name
for your Program using the onscreen keyboard.
Choose the Symbols/Numbers button (.?123) to
display the list of available numbers and symbols
that can be included in the Program Name. To
switch the keyboard back to letters mode, choose
the Letters button (ABC). [15 characters maximum]
5. When finished entering the new Program Name,
choose Accept to save your changes and return to
the File Options screen.
6. Choose to return to the Program
Selection screen.
‘BACK’
✐
NOTE: The program management
procedures outlined in this section are not
available for non-programmable programs
or Analog Mode program.
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com
MANAGING LEGATO 200 SERIES
PROGRAMS
All Existing and User-Defined Programs are stored in the
Program List for ongoing use. Over time, you may want to
manage previously created Programs to keep your
Program List easy to navigate. In addition, the KDS
Legato 200 Series allows you to export Program
information to an externally connected pump or to a
computer that will be used to control operation. This
section of the Guide describes the file management
facilities available on the KDS Legato 200 Series.
✐
NOTE: The program management
procedures outlined in this section are not
available for basic pump models (Infuse
Only & Infuse/Withdraw).