JUMO 14597 safetyM TB/TW - Temperature Limiter and Temperature Monitor Operating Manual - Manual (Page 21)

7 Configuration level 19 2014-06-12
7 Configuration level
All the configuration level parameters C111 - C122 are listed in the table below.
Parameters that are not required are automatically blanked out.
h In normal display, press for longer than 2 secs and AL will appear.
h Press again for longer than 2 secs and C111 will appear.
Each time you press , you move to the next parameter.
All the parameters are freely accessible at the factory, but can be inhibited via the setup program.
v Chapter 10.3 “Activating the access code”