JUMO 14597 safetyM TB/TW - Temperature Limiter and Temperature Monitor Operating Manual - Manual (Page 20)

6 Parameter level 2014-06-12 18
6 Parameter level
This level is where to find the parameters AL, VA, ALD and DF, which are freely accessible to operating personnel at the factory.
h In normal display, press for longer than 2 secs and AL will appear.
This level can be inhibited by the setup program.
v Chapter 10.3 “Activating the access code”
Parameter level
Normal display
seconds
Limit value
Warning
alarm 1
Only available
when C111=24 Digital filter
Only avalable when C119=1 or 2
Alarm limit for
differential