JUMO PCA Communications Software PCC (B 70.9702.0) - Manual (Page 9)

9
3 Installing the software
Run installation
program
h Start Microsoft Windows
h Insert the CD into the drive, then close the drive.
After the CD has been inserted, the installation program will start
automatically. If not, proceed as follows:
h Start file “Launch.exe” in the main directory of the CD.
The installation program will lead you through the rest of the installation with
screen messages.
h Select the software (feature) that needs to be installed.
A
Please consider the folowing items:
- The user who is logged in during installation must be the same
as the one who will subsequently be working with the program.
- The user must have administrator rights during the installation.
The installation will not be carried out correctly unless these
conditions are fulfilled.
H
If Microsoft Windows has already been started, all Windows
programs must be shut down before installing the software.
Software to be installed must be marked by a
tick (
).