JUMO PCA Communications Software PCC (B 70.9702.0) - Manual (Page 79)

79
8 Menu Functions and Toolbar
Preparing the
device modem This function is used to prepare (initialize) a modem so that it can be
connected as a device modem.
h Connect modem to PC via a standard modem cable.
h After entering the settings, click Transmit. When the the settings have been
sent, a result message for the initialization appears.
h Detach the modem from the PC and cable it up correctly to the device
interface.
If the modem responses includes texts such as “Error”, then the modem failed
to interpret one of the commands. You will have to correct the command or
The init (initialization) string for
the connected modem is
selected here.
Connection
These settings
must precisely match those
in the device.
Changeover be
twee
n custom
ized
and original
init
st
rings
The init string is
transferred to the
connected modem.
Only when
the custom-
ized “Initstring”
is active will
most of the
buttons on the
right-hand side
be made
available.
Alter init string
Create init string
Delete init string
Save alterations
adds to the list
of the custom-
ized init strings
the original
initstrings as well
Alter sequence
of the init strings
(modem list)
The modem responses during
transmission appear here.