JUMO PCA Communications Software PCC (B 70.9702.0) - Manual (Page 48)

6 Time Settings
48
Expanded (1)
A
This function depends on the device version!
% of data
not yet
retrieved
(only for
Type 1
Response
to error
Active ( ):
The mark that data have been retrieved
will only be set when the read-out pro-
cedure is finished (only Type 2 devices).
Active ( ):
In the event of an error, a single repeat is carried out. Further
attempts at reading will not be made until the next scheduled
time.
Inactive ( ):
All data will be read out from the device. For Type 1
devices (e.g. IMAGO 500) it can happen that a memory
alarm is generated during the read-out. After a success-
ful read-out, the alarm will automatically be reset.
Active (
):
Only new data will be read, even if “old” data is still
missing in the archive.
Active ( ):
If the operating period ends, an existing read-out proce-
dure continues until all the data have been retrieved.
Inactive (
):
If the operating period ends, an existing read-out proce-
dure is cancelled (after the current data block has been
completely read out).
Active ( ):
In the event of an error, repeats are permitted even
though they are made outside the operating period.