JULABO SC 2500w Professional Series Recirculating Coolers - Manual (Page 57)

Recirculating Cooler
57
or >EPROG < (
VOLTAGE
(U) / CURRENT (I))
> EPROG I< (SETP / FLOWRAT / ACTVAR)
> UW °C< (-99.90 )
> OW °C< (300.00 )
1. Press the button until the desired submenu is displayed.
2. Set value/parameter:
Use the cursor keys to move left or right on the display until the
numeral you wish to change blinks.
Use the increase/decrease arrows
to change the selected
numeral (-, 0, 1, 2, 3, ... 9).
or
select the parameter with the keys .
3. Press enter to store the value / parameter
Continue: Press / or
ALARM
XXXXX
F-ALARM
STANDBY
Alarm output
( for external alarm signal)
Possible parameters:
>F-ALARM< (STANDBY or ALARM or AL-STBY)
>A-ALARM< ( NORMAL or INVERS )
This socket is a potential-free change-over contact. With the adjustments
in the menu item > Funktion-ALARM < all operating conditions can be
signaled without having to change the pin assignments.
Signification of the terms under menu item >Function< :
The recirculating cooler is in condition
>STANDBY< or
>ALARM<
-OFF-
S xx.xx
E -----
XXXXX
ALARM
CODE xx
or >AL-STBY< - both conditions are signaled.