JULABO SC 2500w Professional Series Recirculating Coolers - Manual (Page 51)

Recirculating Cooler
51
Compiling profiles, indicating sections
Example: Section 2
XXXXX
PE STEP
2
XXXXX
P2 SEP
180.0
XXXXX
P2 TIM
00h10
XXXXX
P2 DEL
NO
1 Press the button until the submenu >PE STEP x< is displayed.
1.1 Use the increase/decrease arrows to set the number of the
desired section (1, 2, 3, ... 10).
1.2 Press to enter menu level 3.
Menu level 3:
2
Submenu >Px SEP< (SETPOINT)
Set a temperature value: Example: 180 °C
2.1 Use the cursor keys to move left or right on the display until
the numeral you wish to change blinks.
2.2 Use the increase/decrease arrows to change the selected
numeral (-, 0, 1, 2, 3, ... 9).
2.3 Press enter to store new the value.
2.4 Continue: Press
3 Submenu >Px TIM< (TIME)
Set a time. Example: 10 minutes.
3.1 Use the cursor keys to move left or right on the display until
the numeral you wish to change blinks.
3.2 Use the increase/decrease arrows to change the selected
numeral (-, 0, 1, 2, 3, ... 9).
3.3 Press enter to store new the value.
3.4 Continue: Press
4 Submenu >Px DEL< (DELETE)
Standard setting (NO)
Set the parameter to YES to delete the values in this section.
4.1 If necessary, use the arrows to set the parameter to YES
and press .
5 Press to return to submenu >Px SEP< in menu level 3.
Or
6 Press to return to submenu >PE STEP x< in menu level 2.
XXXXX
P1 xxx
---.-

Sections without value or time indication (including the value 0) are
skipped. But they can be integrated in the profile at a later time.
Example: Section 1
Deleting a profile
XXXXX
PE DEL
YES
>PE DEL< (YES/NO)
Set the parameter to YES to delete all sections >PE STEP / 1 to 10<.