JULABO SC 2500w Professional Series Recirculating Coolers - Manual (Page 49)

Recirculating Cooler
49
PE STEP (No.) 1 2 4 6 8
Px SEP (°C) 100 180 180 75 75
Px TIM (hh.mm) 00:20 00.10 00:20 00:50 00:20
Example:
25
50
10 20 30 40 50 60 10 20 30 40 50 60 10 [min]
75
100
150
200
°C
t
Step 1 2 4 6 8
1. Press the button until the desired submenu is displayed.
2. Set value:
Use the cursor keys to move left or right on the display until the
numeral you wish to change blinks.
Use the increase/decrease arrows
to change the selected
numeral (-, 0, 1, 2, 3, ... 9).
or
select the parameter with the keys .
3.
Press enter to store the value / parameter
Continue: Press / or
Starting a profile
If a profile is stored, the programmer can be started with one of the 3
menu items.
XXXXX
PS STEP
1
XXXXX
PS RUNS
10
XXXXX
PS GO
TIME
>PS STEP< (1 ... 10)
Select the section with which the profile should be started. (STEP)
Example: STEP 1
>PS RUNS< (1 ... 99)
Select the number of profile repetitions. Example: RUNS 10
The profile is repeated 10 times.
>PS GO<
The profile can be started immediately with the parameter (NOW),
or at the set time with the parameter (TIME).
Example below: 19 December 2003
14:25 hrs