Belkin N+ PM00781EA F5D8635-4 - Manual (Page 73)

71
N+ Wireless Modem Router
sections table of contents 1 2 3 4 5 6 8 9 10 7
MaNUally CoNfIgURINg NeTWoRK seTTINgs
5 . If “Manually” is selected, your Router will need to be set up for a
static IP connection type . Write the address information in the table
below . You will need to enter this information into the Router .
6 . If not already selected, select “Using DHCP” next to “Configure” (4),
then click “Apply Now” .
your network settings are now configured for use with the Router .