Belkin N+ PM00781EA F5D8635-4 - Manual (Page 33)

31
N+ Wireless Modem Router
sections table of contents 1 2 3 4 6 7 8 9 10 5
alTeRNaTe seTUP MeTHod
5 . Internet-status Indicator
This indicator is visible in all pages of the Router, indicating the
connection status of the Router . When the indicator says “Connected”
in blue, the Router is connected to the Internet . When the Router is not
connected to the Internet, the indicator will read “No Connection” in
RED . The indicator is automatically updated when you make changes to
the settings of the Router .
6 . Connect/disconnect buttons
Use these buttons to manually connect or disconnect your ADSL
connection as needed .
7 . language
Shows the active language for the Advanced User Interface . Select a
desirable language by clicking one of the available languages .
8 . Version Info
Shows the firmware version, boot-code version, hardware version, and
serial number of the Router .
9 . laN settings
Shows you the settings of the Local Area Network (LAN) side of the
Router . Changes can be made to the settings by clicking on any one
of the links (IP Address, Subnet Mask, DHCP Server) or by clicking the
“LAN” quick-navigation link on the left side of the screen .
10 . Internet settings
Shows the settings of the Internet/WAN side of the Router that
connects to the Internet . Changes to any of these settings can be made
by clicking on the links or by clicking on the “Internet/WAN” quick-
navigation link on the left side of the screen .
11 . WlaN settings
Shows the status of the Router’s Wireless and Guest Access features .
Changes can be made to the settings by clicking on any one of the links
or by clicking the quick-navigation links on the left side of the screen .
12 . adsl Info
Shows the ADSL status and transmission rates .
13 . Router status
Shows the status of various features of the Router, including the power
mode and USB port .
14 . Page Name
The page you are on can be identified by this name . This User Manual
will sometimes refer to pages by name . For instance “LAN > LAN
Settings” refers to the “LAN Settings” page .