Belkin N+ PM00781EA F5D8635-4 - Manual (Page 46)

44
N+ Wireless Modem Router
sections table of contents 1 2 3 4 5 7 8 9 10 6
UsINg THe Web-based adVaNCed UseR INTeRfaCe
1 . Wi-Fi Protected Setup (WPS): Enabled or Disabled .
2 . Personal Identification Number (PIN) Method: In this method, a
wireless client wishing to access your network must supply an
8-digit PIN to the Router . After clicking “Enroll”, you must start the
WPS handshaking procedure from the client within two minutes .
3 . Router PIN: If an external registrar is available, you may enter in the
Router’s PIN to the registrar . Click “Generate New PIN” to change
the PIN from the default value . Click “Restore Default PIN” to reset
the PIN value .
4 . Push Button Configuration (PBC) Method: PBC is an alternate method
to connect to a WPS network . Push the PBC button located on the
back of the Router for two seconds, and then initiate the PBC on the
client device . Alternatively, push the “Start PBC” soft button to start
this process .
5 . Manual Configuration Method: This section lists the default security
settings to be set up if not using WPS .