INFICON Cube CDGsci - Manual (Page 30)

30 tina88e1-b (2014-09)
The standard IP address of the wireless network (default
192.168.0.240) can be changed via
• web interface "Configuration" (→  [4])
• RS232 ASCII interface with the commands FAP and CAP
( →  [2]):
SL> FAP
e.g. Inficon − Inficon
Mobile2
SL>CAP [SSID][|password]
e.g. CAP Inficon|mypassword
FAP
command: Cube will scan available wireless networks.
The output is a list of SSIDs (network names).
CAP
command: Cube will be connected to the wireless net-
work (state SSID and the network password). For networks
without a password only the SSID needs to be stated.
• Ethernet interface with REST services
− connect Cube with a computer via Ethernet cable ( →  12)
− set the Ethernet interface of the computer to any IP
address in the subnet 192.168.0.248|255.255.255.0
(e.g. 192.168.0.247)
− open a web browser (e.g. Mozilla Firefox, version >20, or
Windows Internet Explorer, version ≥10.0)
− search for wireless networks with command
http://192.168.0.248:8087/1/cmd/FAP
The output is a list of SSIDs (network names), e.g. Inficon.
− connect Cube with the choosen network with command:
http://192.168.0.248:8087/1/cmd/CAP%20[SSID
|password]
For networks without a password only the SSID needs to
be stated.