INFICON SQC-222 Thin Film Deposition Controller - Manual (Page 25)

Chapter 2 Operation
2-6
To delete a layer, highlight it in the Layer Select menu and press Cut/Paste.
On the Cut/Paste menu, press Cut to remove the layer. Press Prev Menu to return to
the Layer Select menu.
C u t / P a s t e M e n u
T o
M a i n
P r e v
M e n u
P r o c e s s 2 5 - > L a y e r 1 - > F ilm 1
L a y e r
F ilm 1
F ilm
L a y e r 1
C o p y
C u t
L a y e r 2 F ilm 2
L a y e r 3 F ilm 3
L a y e r 4 F ilm 4
To move or duplicate a layer, highlight it in the Layer Select menu and press Cut/Paste.
On the Cut/Paste menu, press Cut to remove the layer. A copy of the layer is
automatically saved to copy/paste memory. Press Copy to save a copy to memory
without removing the layer. Without leaving the Cut/Past menu, highlight the layer that
you want to insert the cut layer above and press Paste Normal or Paste CoDep.
Operations on the Cut/Past menu can be repeated several times. Each cut operation
overwrites the cut/paste memory. Pressing Prev Menu on the Cut/Past menu returns to
the Layer Select menu. The contents of copy/paste memory are lost!
Note: Once a film is assigned to a process layer, you cannot change the film. Instead,
cut the layer, then insert a new layer and select the desired film.