Access to trigger&alarme menu, Change device pin, Change menu-pin – INFICON UL1000 Helium leak detector User Manual
Page 87: Change device pin change menu-pin, 2 access to trigger&alarme menu, 3 change device pin, 4 change menu-pin
Description of the Menu
87
iina
70
e 0
6
.f
m
te
chn
ica
l ha
nd
boo
k
(1
40
8)
6.8.2
Access to Trigger&Alarme menu
•
>
That allows access to this function (see
) even at a blocked menu access (see
6.8.3
Change Device PIN
•
>
>
The access to the UL1000 and UL1000 Fab can be restricted by a Device-PIN. If the
Device-PIN is not 0000 the UL1000 and UL1000 Fab will ask for this PIN directly after
power on. Without device-PIN the UL1000 and UL1000 Fab foes not even switch on
the pumps.
Notice: Under all circumstances memorize the PINs! The PIN can only be reset by
INFICON’s service organization.
6.8.4
Change Menu-PIN
•
>
>
The access to the menu can be restricted by entering or changing the personal
identification number (PIN). No PIN will be checked if 0000 is entered.
Please refer to Chapter
for the description of the entry.
Notice: Under all circumstances memorize the PINs! The PIN can only be reset by
INFICON’s service organization.