INFICON Helium Leak Detector Modul1000 Interface description - Manual (Page 28)

1-26
Trouble Shooting
jin
s
80
e.f
m
Op
er
at
in
g M
a
nua
l
(1
01
1)
5.2 ASCII Protocol
Error Possible Reason Solution
Modul1000 does not
reply / Modul1000 replies
after several command
with „E10“
„Carriage Return“ at the end of the
command is missing Finish all commands with „Carriage Return“
(ASCII 0dhex / 13dez)
Modul1000 replies with
„E06“ Control via RS232 not enabled in the
Modul1000 Enable control via RS232 (see submenu CONTROL
LOCATION )
Modul1000 replies with
error message to the first
command only, following
commands are
interpreted correctly
Receiving buffer of the Modul1000
was not empty before sending the
first command (e.g. by plugging in the
RS232 cable during operation) In the ASCII protocol the Modul1000 has not time out
function which will empty the receiving buffer
automatically. Therefore, the buffer should be emptied
before the first command by sending of ESC, ^C or ^X