HMC Electronics MCC-DST MicroCare Dust Remover, MicroBlast User Manual
Page 4
7
/
4
Revision 7
DST - MICRO BLAST- BIG BLAST; HIGH PRESSURE PRECISION DUSTER
Respiratory equipment
Vapours are heavier than air and may travel along the floor and in the bottom of containers. At work in confined or poorly ventilated spaces,
respiratory protection with air supply must be used. Self-contained breathing apparatus with full facepiece.
Hand protection
For prolonged or repeated skin contact use suitable protective gloves.
Eye protection
Wear approved, tight fitting safety glasses where splashing is probable.
Other Protection
Wear suitable protective clothing as protection against splashing or contamination.
Hygiene measures
No specific hygiene procedures noted, but good personal hygiene practices are always advisable, especially when working with
chemicals. When using do not eat, drink or smoke.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties
Appearance
Liquid Gas Aerosol.
Colour
Colourless.
Odour
Slight odour. Ether
Solubility
Slightly soluble in water.
Vapour density (air=1)
3.6 @ 25 C / 77 F
Vapour pressure
96 PSIA 25 C / 77 F
Flammability Limit - Lower(%)
n/a
Flammability Limit - Upper(%)
n/a
Other Flammability
This product is not flammable.
Comments
Aerosol.
9.2. Other information
Refractive Index
Not determined.
Particle Size (Micron)
Not applicable.
Volatility Description
Highly volatile.
Volatile By Vol. (%)
100
Volatile Organic Compound (VOC)
Not applicable.
SECTION 10: STABILITY AND REACTIVITY
10.1. Reactivity
No specific reactivity hazards associated with this product.
10.2. Chemical stability
Stable under normal temperature conditions and recommended use.
10.3. Possibility of hazardous reactions
Hazardous Polymerisation
Will not polymerise.
10.4. Conditions to avoid
Avoid exposing aerosol containers to high temperatures or direct sunlight. Avoid contact with naked flames and hot surfaces as corrosive
and toxic decomposition products can be formed.
10.5. Incompatible materials
Materials To Avoid
Alkali metals. Alkali earth metals. Powdered metal.
10.6. Hazardous decomposition products
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440