HMC Electronics 33+SUPER 3M Electrical Tape, Scotch Vinyl User Manual
Scotch, Super 33+ vinyl electrical tape, Data sheet
Scotch
Super 33+ Vinyl Electrical Tape
Data Sheet
Product Description:
Scotch
Super 33+ Vinyl Electrical
Tape is a premium grade, 7 mil
thick, all–weather vinyl-insulating
tape. It is designed to perform
continuously in ambient
temperatures up to 105
°
C (220
°
F).
The tape is conformable for cold
weather application down to –18
°
C
(0
°
F). It has excellent resistance to
abrasion, moisture, alkalies, acids,
corrosion and varying weather
conditions (including ultraviolet
exposure). The combination of
elastic backing and aggressive
adhesive provides moisture–tight
electrical and mechanical
protection with minimum bulk.
Super 33+ is an Underwriters’
Laboratories Listed and Canadian
Standards Association Certified
“Insulating Tape”.
•
UL Listed; UL 510 Standard
“Insulating Tape” (product
category OANZ), File E129200
•
CSA Certification; Standard
C22.2 No.197–M1983 “PVC
Insulating Tape,” File LR 48769
•
Polyvinyl chloride (PVC)
backing.
•
Pressure–sensitive rubber
based adhesive.
•
Compatible with solid dielectric
cable insulations.
•
Compatible with rubber and
synthetic splicing compounds,
as well as epoxy and
polyurethane resins.
•
Inhibits corrosion of electrical
conductors.
•
For indoor or outdoor
applications.
Applications:
•
Primary electrical insulation
for all wire and cable splices
rated up to 600 volts and
105
°
C (220
°
F).
•
Primary electrical insulation
for 600 volt bus applications,
and protective jacketing for
low and high voltage bus.
•
Protective jacketing for high
voltage cable splices and
repairs.
•
Harnessing of wires and
cables.
Typical Data /
Physical Properties:
Temperature Rating:
UL 510
80
°
C (176
°
F)
CSA
C22.2 No. 197–M1983
Handling –18
°
C (0
°
F)
Continuous
Operation 105
°
C (220
°
F)
Color
Black
Thickness
ASTM D1000
7 mils
Adhesion to Steel
ASTM D1000
22
°
C (72
°
F) 28
oz./in.
–18
°
C (0
°
F) 60
oz./in.
Adhesion to Backing
ASTM D1000
22
°
C (72
°
F) 25
oz./in.
–18
°
C (0
°
F) 60
oz./in.
Breaking Strength
ASTM D1000
22
°
C (72
°
F) 15lbs./in.
Ultimate Elongation
ASTM D1000
22
°
C (72
°
F) 250%
–18
°
C (0
°
F) 100%
Flammability
(Maximum)
UL 510
1 sec.
ASTM D1000
4 sec.
Accelerated Aging
ASTM D1000
80%
Flagging
ASTM D1000
<0.1 inch
Telescoping
24 Hours @ 50
°
C
<0.1 inch
(120
°
F).
Electrical Properties:
Voltage Rating
UL 510
600V
Dielectric Strength
ASTM D1000
Standard Condition
1150
V/mil
High Humidity
90% of std.
Insulation Resistance
ASTM D1000
>1 x10
6
megohms
(High Humidity Method)
Note: These are typical values
and should not be used for
specification purposes.
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440