HMC Electronics DP100 3M DP-100 Scotch-Weld Epoxy Adhesive - Manual (Page 4)

Urethane
DP600
(Gray) Concrete repair
Self-leveling 1:1 6,000 1 minute 4 minutes 2,300
DP600NS
(Gray) Concrete repair
Non-sag 1:1 Paste 1 minute 2 minutes 2,300
DP601
(Gray) Flexible
Self-leveling 1:1 6,000 1 minute 4 minutes 2,300
DP601NS
(Gray) Flexible
Non-sag 1:1 Paste 1 minute 2 minutes 2,300
DP604NS
(Black) Flexible
Non-sag 1:1 Paste 4 minutes 20 minutes 900
DP605NS
(Off-White) Semi-rigid
Non-sag 1:1 150,000 5 minutes 20 minutes 1,350
DP608
(Black) Flexible
Non-sag 1:1 Paste 10 minutes 90 minutes 2,000
DP620NS
(Black) Flexible
Non-sag 1:1 Paste 20 minutes 4 hours 2,500
DP640*
(Brown) Tough flexible bonds
Non-sag 1:1 25,000 40 minutes 8 hours 2,000
DP5001
(Black) Flexible
Conveyor belt repair 1:1 100,000 1 minute 15 minutes 600
DP5003
(Black) Non-sag
Vertical applications 1:1 Paste 3 minutes 60 minutes 500
DP5105
(Gray) Low temperature flexibility
Expansion joint seals 1:1 32,000 5 minutes 9 hours 150
DP5106
(Gray) High strength
Control joint seals 1:1 34,000 4 minutes 40 minutes 1,100
Product
(Color) Key
Features Mix Ratio
(Volume)
B:A Approximate
Viscosity
75°F (24°C)
(cps) Approximate
Mixed Worklife
at 75°F (24°C) Approximate
Time to Handling
Strength at 75°F
(24°C) Average
T-Peel at
75°F (24°C)
(piw) Overlap Shear (psi)
-67°F
(-55°C) 75°F
(24°C) 180°F
(82°C)
3M ™ Scotch-Weld ™ Structural Adhesives in Duo-Pak Cartridges and Bulk (continued)
DP805
(Light Yellow) Fast strength build
Minimal surface prep 1:1 110,000 3 minutes 10 minutes 35 2,500 3,500 2,200
DP810
(Tan, Black) Tough durable bonds
High impact resistance 1:1 20,000 10 minutes 20 minutes 30 1,200 3,600 500
DP810NS
(Tan) Tough durable bonds
Non-sag 1:1 95,000 10 minutes 20 minutes 20 1,200 4,000 500
DP820*
(Light Yellow) Tough durable bonds
Minimal surface prep 1:1 55,000 15 minutes 40 minutes 20 3,100 3,150 1,900
DP8005
(Off-White,
Black) Bonds polyolefins and low
surface energy materials 10:1 25,000 3 minutes 3 hours 10 2,400 300
DP8010
(Off-White) Bonds polyolefins and low
surface energy materials 10:1 20,000 10 minutes 2 hours 35 1,800 400
Acr
ylic
DP8010NS Bonds polyolefins and low 10:1 65,000 10 minutes 2 hours 30 2,400 400
(Off-White) surface energy materials
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
* Available in Duo-Pak Cartridge only.
4
3M ™ Concrete Repair DP600 Self-Leveling sets quickly to anchor bolts and repair
deep cracks and spalls in concrete.
With no surface preparation,
3M
™ Scotch-Weld ™ Structural
Acrylic Adhesive DP8010
bonds the mitered corners of
a simulated-wood composite
plastic P.O.P. display,
eliminating nails that would
compromise appearance.
5
6 7
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440