Barco R9001390 - Manual (Page 37)

8-9
Random Access Adjustment Mode
5975938 BARCOREALITY 9200TCR+ 020798
Select with or
then
to return.
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
GEOMETRY
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Select with or
then
to return.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Select with or
then
to return.
Edge Enhancement
Increases edge sharpness on all video and data sources.
Highlight Edge enhancement by pushing the control disc up or down
and press ENTER to select.
OFF : off
MIN : half normal setting
MED : normal setting
MAX : 1.5 times normal setting
Select with or
then
to return.
PICTURE TUNING
CTI [ON]
STILL VIDEO [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
EDGE ENHANCEMENT
EDGE ENHANCEMENT
MIN MED MAX OFF
Geometry
Highlight Geometry by pushing the control disc up or down and press
ENTER to select the geometry selection menu.
The following adjustment are possible :
- horizontal and vertical image shift.
- horizontal and vertical image size
- side keystone (only necessary if the projector is mounted at
a non standard projection angle).
- blanking
- options
The following ways are possible to adjust a geometry function :
- using the control disc to adjust or
- entering the value with the digit keys. Therefore, press ENTER to
select the indicated value and enter the desired value with the digit
keys. Press ENTER to confirm the entered value.
Shift
Highlight Shift by pushing the control disc up or down and press
ENTER.
The image can be shifted in a horizontal or vertical direction. Push
the control disc up or down to shift the image in a vertical direction.
Push the control disc to the right or to the left to shift the image in a
horizontal direction. The default value for the shift is 0.
Shifting in a vertical direction : when the shift value is positive, the
image is shifted upwards, when the value is negative, the image is
shifted downwards.
Shifting in a horizontal direction : when the shift value is positive, the
image is shifted to the right, when the value is negative, the image is
shifted to the left.