Enerpac WSL-442 - Manual (Page 5)

2b. Lightly lubricate the provided O-Ring (item C) and install it in the
counterbore around the manifold breather port.
2c. Remove the breather fitting (item A) from the side breather port and
plug the port using a 1/8 NPT pipe plug.
2d. The breather fitting can be reused at a non-flooded area of the fixture.
(5)
A
B D
C C
E
Figure 1 - Work Support
EEEE
Plug
Fitting
Tubing
Hydraulic Port
H
G
F
E
Manifold
Hydraulic Port
D
O-Ring C
Manifold
Breather Port
B
Breather Fitting A
F
G
Figure 2 - Venting Through Side Port
(Using additional tubing and fitting)
A
H
32
C C
Figure 3 - Venting Through Manifold Port /
Hydraulic Manifold Mounting