Enerpac WSL-442 User Manual
Page 3
SAFETY INFORMATION
To avoid personal injury during system operation, read and follow all CAUTIONS, WARNINGS,
and INSTRUCTIONS included with or attached to each product. ENERPAC CANNOT BE
RESPONSIBLE FOR DAMAGE RESULTING FROM UNSAFE USE OF PRODUCT, LACK OF
MAINTENANCE, OR INCORRECT PRODUCT OR SYSTEM APPLICATION. Contact Enerpac
when in doubt about applications and safety precautions.
WARNING
The system operating pressure must not exceed the
maximum pressure rating of the lowest rated component in the
system. Always check product limitations regarding pressure
ranges, load capacities, and set-up requirements. Personal injury
and/or equipment damage can occur if system operating pressure
exceeds the maximum pressure rating of system components.
WARNING
Always wear proper personal protective gear when operating
hydraulic equipment (i.e. safety glasses, gloves, etc.)
.
WARNING
Make sure that all system components are protected from
external sources of damage, such as excessive heat, flame, moving
machine parts, sharp edges, and corrosive chemicals.
WARNING
Do not exceed the specified maximum load on the support
plunger.
(3)