ElmoMC Gold Line Digital Servo Drives-Gold Bell - Manual (Page 39)

Gold Bell Installation Guide Installation
MAN-G-BELIG (Ver. 1.004)
www.elmomc.com
39
4.7.2. Main Power
Pin Function Cable Pin Positions
VP+ Pos. Power input Power
PR Power return Power
PE Protective earth Power
Table 10: Connector for Main Power
Connect the VP+, PR and PE pins on the Gold Bell in the manner described in Section 4.3.2.1.
Note: The source of the Main Power Supply must be isolated.
Figure 7: Main Power Supply Connection Diagram (no Auxiliary Supply)