ElmoMC Gold Line Digital Servo Drives-Gold Bell - Manual (Page 11)

Gold Bell Installation Guide
MAN-G-BELIG (Ver. 1.004)
www.elmomc.com
11
Chapter 2: Product Description
2.1. Functional Description
The Gold Bell is an advanced high power density servo drive. It provides top servo
performance, advanced networking and built in safety, all in a small PCB mountable package.
The Gold Bell has a fully featured motion controller and local intelligence.
The Gold Bell operates from a DC power source. The drive can operate as a stand-alone device
or as part of a multi-axis system in a distributed configuration on a real-time network.
The Gold Bell drive is easily set up and tuned using the Elmo Application Studio (EAS) software
tools. As part of the Gold product line, it is fully programmable with the Elmo motion control
language. For more information about software tools refer to the Elmo Application Studio
Software Manual.
The Gold Bell is available in a variety of models. There are multiple power rating options, two
different communications options, a number of feedback options and different I/O
configuration possibilities.
2.2. Product Features
Note: The features described in this chapter relate to the range of Gold Bell models.
Depending on the model you have purchased, not all features are available.
To see the features for your model, look at the product label on the Gold Bell and use the
product catalog number schematic that appears at the beginning of this manual and on
page 24 to determine which specific features are available to you.
2.2.1. High Power Density
The Gold Bell delivers up to 1.6 kW of continuous power or 3.2 kW of peak power in a 49.4 cc
(3.02 in
3 ) package (55 x 59 x 15 mm or 2.17” x 2.32” x 0.6”)