Eberspacher EasyStart Call - Manual (Page 6)

6 | VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn
oPEratE Easystart call Via toNE
DialliNg (Dtmf)
(Landline or mobile phone)
set your landline telephone to tone dialling
(DTMF). For information on this, please refer
to the operating instructions for your tel-
ephone. For mobile phones, this function is
usually pre-set.
CALL eAsysTART CALL
ƒ you received a phone number from your
network operator when you acquired the
siM card. This is the phone number of your
easystart Call.
ƒ use the landline / mobile phone to dial the
phone number of your easystart Call.
ƒ After the connection is established, you
hear the greeting text “eberspächer
easystart Call, Welcome”, followed by the
request “please enter your password.”
enter the password (four digit access pin)
and then press the pound key to confirm.
The password (four digit access pin) is
factory set to “1234”.
Password entry (four digit access PiN)
correct
if the password (four digit access pin)
is entered correctly, the announcement
“Main menu” occurs and the available
commands (max. 2 repetitions) are listed
or the currently activated function is
stated.
Password entry (four digit access PiN)
incorrect
if the password (four digit access pin)
is entered incorrectly, you hear the
announcement “incorrect input” fol-
lowed by the request “please enter your
password”.
if the password (four digit access pin) is
entered incorrectly 3 times in a row, then
the connection is dropped.
PlEasE NotE!
ƒ if the phone number which the easystart
Call calls is authorised (the phone number
cannot be suppressed, call forwarding
must be deactivated), the password (four
digit access pin) 1234 no longer has to be
entered.
The easystart Call starts with the main
menu.
ƒ if no further entry is made within 30
seconds of the selection of a function, then
the connection is terminated.
ƒ you can end the announcements by
pressing key 1, 2, 3 or 4 to change into a
new function.
ƒ All entries, e.g., password changes,
temperature, heating duration, etc., can
by cancelled by pressing the key, after
which a new entry can be made.
2 OpeRATiOn