Eberspacher EasyStart Call - Manual (Page 17)

Vehicle heaters – Technical Documentation | 17
2 OpeRATiOn
function
sMs command (  = symbol for space)
note / input options
heater feedback
Ventilating oN
pin:1234heater:on,mode:fan
The last entry for duration (run) remains valid.
e.g.
heater:on,mode:fan,run:45,
heater oN –
with entries for duration and temperature
pin:1234heater:on,run:*,sp:**
* entry of duration
you can enter a value between
10 and 120
minutes or perm for continuous operation.
Continuous operation is only possible for air
heaters.
** entry of temperature value (only for air heat-
ers) Temperature range 8 °C – 36 °C / 46 °F
– 97 °F.
enter single-digit temperature values,
e.g., 9 = correct, 09 = incorrect.
enter double-digit temperature values,
e.g., 21 = correct, 021 = incorrect.
e.g.
heater:on,mode:heater,run:45,
sp:24 (for air heaters only)
Example
entry for heating, continuous operation and tem-
perature for an air heater:
pin:1234heater:on,run: perm ,sp: 24
entry for heating and duration for a water heater:
pin:1234heater:on,run: 30
heater:on,mode:heater,run:perm,sp:24
heater:on,mode:heater,run:30