Control using the button, 2 operation – Eberspacher EasyStart Call User Manual
Page 26
26 | VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn
coNtrol usiNg thE buttoN
The easystart Call scope of supply includes a
button with an indicator light.
This button must be installed since it is nec-
essary for operating the heater.
The integrated indicator light displays the cur-
rent operating status.
The button can be used to manually switch
the heater on and off.
The previous entries for duration and tem-
perature are valid.
in addition, you can press the button and call
the easystart Call to reset the password (four
digit access pin).
To do so, hold the button down when you are
requested to enter the password and simul-
taneously enter the four digit access pin
1234 (factory setting). The easystart Call then
switches to the main menu.
if the heater is running when you press the
button (indicator light on), the heating is
switched off.
2 OpeRATiOn