Eberspacher EasyStart Call - Manual (Page 21)

Vehicle heaters – Technical Documentation | 21
2 OpeRATiOn
function
sMs command (  = symbol for space)
note / input options
heater feedback
Entry example 1 on timer programming
pin:1234t
1 :on, time: Tu.06.30
entry:
pin:1234
for password and space
t1: for timer 1
on, to activate heater
(operating mode heat)
time:Tu.06.30 Departure time Tuesday, 6:30 a.m.
The previous entries for duration (run) and tem-
perature (sp) remain valid.
e.g.
T1:on,time:Tu.06.30,mode:heater,
run:45,sp:24 (for air heaters only)
Entry example 2 on timer programming
pin:1234t
2 :on,time: MO-FR.16.30 ,mode: fan ,
run: 40
entry:
pin:1234
for password and space
t2: for timer 2
on, to activate heater
time:MO-FR.16.30
start time Monday-Friday,
16:30 p.m.
mode:fan for operating mode ventilation
run:40 for ventilating duration
40 minutes
The start time for the heater is factory set to
departure time (end). The
start time (start)
must be configured; see installation instruc-
tions.
e.g.
T2:on,time:MO-FR.16.30,mode:fan,
run:40