Det-Tronics ATX10 Transmitter - Manual (Page 29)

2.5 95-8657 27
Device repair anD return
Prior to returning devices, contact the nearest local
Detector Electronics office so that a Return Material
Identification (RMI) number can be assigned. A
written statement describing the malfunction must
accompany the returned device or component to
assist and expedite finding the root cause of the
failure.
Pack the unit properly. Always use sufficient packing
material. Where applicable, use an antistatic bag
as protection from electrostatic discharge. The RMI
number should be clearly marked on the outside of the
box.
Note
Det-tronics reserves the right to apply a service
charge for repairing returned product damaged
as a result of improper packaging.
Return all equipment transportation prepaid to the
factory in Minneapolis.
Note
It is highly recommended that a spare be kept on
hand for field replacement to ensure continuous
protection.
OrDerinG inFOrmatiOn
One AC100 Acoustic Sensor with its associated ATX10
Transmitter is required for each detection point. The
two devices can be ordered separately, or as a kit (Kit
includes individually packaged AC100 and ATX10).
Refer to the appropriate Model Matrix for ordering
details. Note: the ATX10 is supplied with memory
module and SD card.
Part Number Description
012152-001
AC100/ATX Kit, 3/4” NPT
AC100SNT2 & ATX10S5N26T
012153-001 AC100/ATX Kit, M25
AC100SMT2 & ATX10S5M26T
REPLACEMENT PARTS
Part Number Description
011355-001
Foam Insert for AC100
010969-001 ATX10 Replacement Module
011365-002 Memory Module (w/o SD card)
104155-001 Micro SDHC Card, 4G, Industial
Temperature Rating
103028-027 Plug, 5.0 mm, 4 Position (P1)
103028-028 Plug, 5.0 mm, 5 Position (J3)
ACCESSORIES
Part Number Description
226365-603
STB7S5YW M25 Sensor Termination
Box, (Stainless Steel model only)
226365-604 STB7S5NW 3/4 NPT Sensor Termination
Box, (Stainless Steel model only)
012402-001 W6300S1004 Inspector Connector
(software not included)
012400-001 Acoustic Inspector Package
012401-001 Acoustic Configurator Package
009700-001 Magnetic Tool
101197-004* Stop Plug, 3/4” NPT, SS
101197-003 Stop Plug, M25, SS, IP66
010817-001* Stop Plug, 20 Pack, 3/4” NPT, SS
010819-001 Stop Plug, 20 Pack, M25, SS, IP66
005003-001 Lubriplate grease, 1 oz.
*NEMA Type 4X/IP66 rating requires Teflon tape.
ASSISTANCE
For assistance in ordering a system to meet the needs
of a specific application, please contact:
Detector Electronics Corporation
6901 West 110th Street
Minneapolis, Minnesota 55438 USA
Operator: (952) 941-5665 or (800) 765-FIRE
Customer Service: (952) 946-6491
Fax: (952) 829-8750
Web site: www.det-tronics.com
E-mail: [email protected]