Despatch Protocol Controller User Manual
Page 22
16
WARNING: Never operate the oven
at a temperature in excess of the
maximum operating temperature.
2.
Use the + or - keys to enter the ramp time.
c.
Program the events desired during the ramp time.
1.
Press – key. EVENTS will be displayed.
2.
Press – key for each event.
3.
Use the + or - keys to program the event outputs ON or OFF for the
ramp period.
d.
Program the ramp ending temperature.
1.
Press – key. TEMP and the ramp ending temperature will be
displayed.
2.
Use the + or - keys to enter the desired ramp ending temperature.
e.
Program the soak time.
1.
Press – key. SOAK and the
soak time will be displayed.
2.
Use the + or - keys to enter the soak time.
f.
Program the events desired during the soak time.
1.
Press – key. EVENTS will be displayed.
2.
Press – for each event.
3.
Use the + or - keys to program the event ON or OFF for the soak
period.
g.
Enter the remaining segments 2-6 by following steps a through f.