Dakota Ultrasonics DFX-7 plus MANUAL1 - Manual (Page 84)

Dakota Ultrasonics
80
2) Press the UP and DOWN arrow keys multiple times until ERS is highlighted,
followed by pressing the LEFT and RIGHT arrow keys to scroll the value.
When the correct ERS is displayed, proceed to the next setting.
2) Alternatively, press the ENTER key to display the Digits Edit Box.
3) Press the UP and DOWN arrow keys multiple times to scroll the highlighted
value.
4) Press the LEFT and RIGHT arrow keys multiple times to scroll the digit
locations.
5) Repeat steps 3 & 4 until the ERS is correctly displayed.
6) Press the OK key to set the ERS and return to the menu screen, or ESC to
cancel entering the ERS.
Attenuation (All Parameters)
1) Press the UP and DOWN arrow keys multiple times until ATTENUATION is
highlighted, followed by pressing the ENTER key to enter the
ATTENUATION sub menu.
2) Press the UP and DOWN arrow keys multiple times to scroll the correct
attenuation parameter is highlighted.
3) Press the UP and DOWN arrow keys multiple times until the desire
attenuation parameter is highlighted, followed by pressing the LEFT and
RIGHT arrow keys to scroll the value. When the correct value is displayed,
proceed to the next parameter.
4) Alternatively, press the ENTER key to display the Digits Edit Box.
5) Press the UP and DOWN arrow keys multiple times to scroll the highlighted
value.