Dakota Ultrasonics DFX-7 plus MANUAL1 - Manual (Page 21)

DFX-7 Ultrasonic Flaw Detector
17
3.16 XFER (transfer) – Menu
BACKUP SETUPS: Enables the user the ability to backup the setups currently
stored in the DFX-7 to a PC via RS232 port. USB adaptor included. Refer the help
section of the DFX-7
DakView software for a complete electronic manual.
RESTORE SETUPS: Enables the user the ability to restore the setups currently
saved on a PC to an DFX-7 via RS232 port. Refer the help section of the DFX-7
DakView software for a complete electronic manual.
BACKUP DATA: Enables the user the ability to backup grids or sequential log files
currently stored in the DFX-7 to a PC via RS232 port. Refer the help section of the
DFX-7
DakView software for a complete electronic manual.
RESTORE DATA: Enables the user the ability to restore grids or sequential log files
currently saved on a PC to an DFX-7 via RS232 port. Refer the help section of the
DFX-7 DakView software for a complete electronic manual.
ABOUT: Provides the user with Dakota Ultrasonics contact information and the
DFX-7 firmware version. Refer to the Dakota Ultrasonics web site for information on
the latest firmware versions available for download.
3.17 CLR (clear) Key
The primary functions of the CLR key, is to clear a measurement from a grid or
sequential log files cell location or set obstruct, backspace in an Alpha Edit Box, or
clear a DAC reference point used to generate a curve. Use this key to clear saved
measurement & waveform.
3.18 MEAS (measurement mode) Key
The MEAS key puts the DFX-7 into its primary mode of operation. In this mode, the
user has a complete view of the LCD. When pressed multiple times, navigates the
hot menu items.
3.19 OK Key