Dakota Ultrasonics DFX-7 plus MANUAL1 - Manual (Page 25)

DFX-7 Ultrasonic Flaw Detector
21
The diagram above is a screenshot of the “Hot Menu” feature of the DFX-7. The Hot
Menu’s contain all the most regularly adjusted features of the gauge. The primary
purpose of the design, was to provide the user with an efficient way to make
adjustments on the fly during inspections. The following procedure outlines the steps
to navigate and make adjustments as follows:
Hot Menu
Gate1
1) Press the MEAS key once to activate the Hot Menu. Press the MEAS key
multiple times to advance the cell right, and the ESC key multiple times to
advance the cell left, until the WIDTH1 cell is highlighted.
2) Press the LEFT and RIGHT arrow keys to toggle the value or status.
Note: This is a coarse adjustment. It’s the fastest and easiest way to
increment, decrement, or toggle the status, however it does so in coarse steps.
Set Detect
1) Press the UP and DOWN arrow keys until DETECT is highlighted.
2) Press the LEFT and RIGHT arrow keys to toggle the ABOVE or BELOW.