Dakota Ultrasonics DFX-7 plus MANUAL1 - Manual (Page 150)

Dakota Ultrasonics
146
14.3 Using the XFER menu (DFX-7)
The XFER menu of the DFX-7 will be used in conjunction with the DakView PC
software. The steps below outline the procedure for accessing the XFER menu and
basic operation as follows:
Accessing and Using the XFER Menu
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right, and the ESC key multiple times to tab left,
until the XFER menu is highlighted and displaying the submenu items.
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until the desire option is highlighted.
3) Press the ENTER key to activate the option selected.
4) Once the Backup or Restore function has been completed, press the
MEAS key once to return to the menu items, or twice to return to the
measurement mode.