Dakota Ultrasonics CMX DL - Manual (Page 67)

CMX
DL
High Performance Material & Coating Thickness Gauge
63
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until B-DEPTH is highlighted.
3) Press the LEFT and RIGHT arrow keys to scroll the value. When the
correct width is being displayed, proceed to step 8.
4) Alternatively , press the ENTER key to display the Digits Edit Box.
5) Press the UP and DOWN arrow keys to scroll the highlighted value.
6) Press the LEFT and RIGHT arrow keys to scroll the digit locations.
7) Repeat steps 5 & 6 until the B-Depth value is correctly displayed.
8) Press the OK key to set the B-Depth and return to the menu screen, or ESC
to cancel entering the B-Depth.
9) Finally, press the MEAS key to return to the measurement screen and begin
taking readings.