Brother DCP-395CN - Manual (Page 50)

Chapter 5
42
e
Press OK. Then press + or - repeatedly
to enter the number of copies you want.
f
Do one of the following:
„ Press OK and change the print
settings. (See page 47.)
„ If you do not want to change any
settings, press Colour Start to print.
Enhance Skin-Tone
5
Enhance Skin-Tone is best used for adjusting
portrait photographs. It detects human skin
colour in your photos and adjusts the image.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose
Enhance Skin-Tone.
Press OK.
e
Do one of the following:
„ Press OK if you do not want to
change any settings.
„ Press a or b to adjust the effect level
manually. Press OK when you have
finished.
f
Press + or - repeatedly to enter the
number of copies you want.
g
Do one of the following:
„ Press OK and change the print
settings. (See page 47.)
„ If you do not want to change any
settings, press Colour Start to print.
Enhance Scenery
5
Enhance Scenery is best used for adjusting
landscape photographs. It highlights green
and blue areas in your photo, so that the
landscape looks more sharp and vivid.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose
Enhance Scenery.
Press OK.
e
Do one of the following:
„ Press OK if you do not want to
change any settings.
„ Press a or b to adjust the effect level
manually. Press OK when you have
finished.
f
Press + or - repeatedly to enter the
number of copies you want.
g
Do one of the following:
„ Press OK and change the print
settings. (See page 47.)
„ If you do not want to change any
settings, press Colour Start to print.