Brother DCP-395CN - Manual (Page 31)

General setup
23
3
Setting the backlight
brightness
3
If you are having difficulty reading the LCD,
try changing the brightness setting.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose Backlight.
e
Press d or c to choose Light, Med or
Dark.
Press OK.
f
Press Stop/Exit.
Setting the Dim Timer for the
backlight
3
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose Dim Timer.
e
Press d or c to choose 10Secs,
20Secs, 30Secs or Off.
Press OK.
f
Press Stop/Exit.
Printing Reports
3
The following reports are available:
„ Help List
A help list showing how to program your
machine.
„ User Settings
Lists your settings.
„ Network Config
Lists your Network settings.
How to print a report
3
a
Press Menu.
b
Press a or b to choose
Print Reports.
Press OK.
c
Press a or b to choose the report you
want.
Press OK.
d
Press Mono Start.
e
Press Stop/Exit.