Control panel overview – Brother DCP-395CN User Manual

Page 14

Chapter 1

Control panel overview

1 LCD (liquid crystal display)

Displays messages on the screen to help you
set up and use your machine.
Also, you can adjust the angle of the LCD
screen by lifting it.

2 Number of Copies

Use this key to make multiple copies.

3 Menu keys:

or c

Press to scroll backward or forward to a
menu selection.
Also, press to choose options.

or b

Press to scroll through the menus and
options.

Clear/Back
Press to go back to the previous menu
level.

Menu
Lets you access the main menu to program
the machine.

OK
Lets you choose a setting.

4 Start keys:

Colour Start

Lets you start making copies in full colour.
Also lets you start a scanning operation (in
colour or mono, depending on the scanning
setting in the ControlCenter software).

Mono Start

Lets you start making copies in
monochrome. Also lets you start a
scanning operation (in colour or mono,
depending on the scanning setting in the
ControlCenter software).

Stop/Exit

Stops an operation or exits from a menu.

6 On/Off

You can turn the machine on and off.
If you turn the machine off, it will still
periodically clean the print head to maintain
print quality. To prolong print head life, provide
the best ink cartridge economy, and maintain
print quality, you should keep your machine
connected to the power at all times.

7 Ink Management

Lets you clean the print head, check the print
quality, and check the available ink volume.

Mem.

Normal

100%

Enlarge/Reduce

Plain Paper

Paper

Paper Type

ype

Ratio:

Quality