Brother DCP-395CN - Manual (Page 37)

Making copies
29
4
Making N in 1 copies or a
poster (Page Layout)
4
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also make a poster. When you use
the poster feature your machine divides your
document into sections, then enlarges the
sections so you can assemble them into a
poster.
IMPORTANT
• Make sure the paper size is set to Letter
or A4.
• You cannot use the Enlarge/Reduce
setting with the N in 1 and Poster features.
• If you are producing multiple colour
copies, N in 1 copy is not available.
• (P) means Portrait and (L) means
Landscape.
• You can only make one poster copy at a
time.
Note
Watermark Copy, Book Copy,
Ink Save Mode and Enlarge/Reduce
are not available with Page Layout.
a
Load your document.
b
Enter the number of copies you want.
c
Press a or b to choose Page Layout.
d
Press d or c to choose Off(1 in 1),
2 in 1 (P), 2 in 1 (L),
4 in 1 (P), 4 in 1 (L) or
Poster(3 x 3).
Press OK.
e
If you do not want to change additional
settings, press Mono Start or
Colour Start to scan the page.
If you are making a poster the machine
scans the pages and starts printing.
Go to step f.
f
After the machine scans the page, press
+ (Yes) to scan the next page.
g
Place the next page on the scanner
glass.
Press OK.
Repeat steps f and g for each page of
the layout.
h
After all the pages have been scanned,
press - (No) to finish.