Brother HL-3260N User Manual

Page 49

CHAPTER 1 ABOUT THIS PRINTER

1-25

☛

☛ 8.

Align the rear guide to the loaded paper size while pressing the release lever
of the rear guide.

ZAEY033E

Fig. 1-20

☛

☛ 9.

Adjust the paper size dial in the paper tray for the loaded paper size.

ZAEY050E

Fig. 1-21

✒

Note

• Confirm that the setting of the paper size dial matches the paper size

and feed direction of the paper in the Paper tray, otherwise paper
misfeeds or unexpected printing results might occur.

• Confirm that the paper size dial matches the actual paper size loaded in

the Paper tray. If the actual paper size is not shown on the dial, set the
dial to “

✱” and specify the paper size using the Control panel. For more

information on specifying the paper size,

☛

☛ 10.

Slide the Paper tray into the printer until it stops.

☛

☛ 11.

Set the paper sensor.

ZAEY260E

Fig.1-22