Brother HL-3260N - Manual (Page 180)

CHAPTER 4 OPTIONS
4-57
♦
Duplex printing
If you use the duplex function, we recommend additional DIMMs.
300 dpi 600 dpi
HP LaserJet standard standard
BR-Script 3 standard standard
The following capacity of DIMM can be installed:
• 16 Megabyte TECHWORKS PM-HP 16M-BR
• 32 Megabyte TECHWORKS PM-HP 32M-BR
• 64 Megabyte TECHWORKS PM-HP 64M-BR
• 128 Megabyte TECHWORKS PM-HP 128M-BR
In general, the DIMM must have the following specifications:
Type: 100 pin and 32 bit output
CAS Lantency 2 or 3
Clock Frequency 66MHz or more
Capacity: 16, 32, 64 Megabyte or 128 Megabyte
Height: 46mm (1.8 inches) or less
Parity NONE
DRAM Type: SDRAM 4 Bank
SDRAM can be used.
✒
Note
•
Some DIMMs might not work with this printer.
•
For more information, consult the dealer where you purchased the
printer.
•
For the latest information visit: http://www.brother.com