Brother HL-3260N - Manual (Page 130)

CHAPTER 4 OPTIONS
4-7
☛ ☛ ☛ ☛ 4.
Slide out the four handles on both sides of the printer.
ZAEP040E
Fig. 4-6
☛ ☛ ☛ ☛ 5.
Holding the handles, lift the printer and align the front faces of the printer
and the paper feed unit, then place the printer onto the paper feed unit.
✒
Note
• When lifting the printer, pull out the grips from the front of the printer.
Hold the grips at the front, and hold the inset grips at the rear. The printer
should be lifted by at least two people.
ZAEP600E
Fig. 4-7
• Do not trap the harness between the back of the paper feed unit and the
printer.
ZAEP050E
Fig. 4-8