Brother HL-3260N - Manual (Page 170)

CHAPTER 4 OPTIONS
4-47
☛ ☛ ☛ ☛ 7.
Use a coin to remove the screw, and then remove the cover as shown in the
illustration
✒
Note
• The removed screw and cover are no longer required.
Fig. 4-77
☛ ☛ ☛ ☛ 8.
Return the Paper sensor into the Output tray as shown in the illustration.
Fig. 4-78
☛ ☛ ☛ ☛ 9.
Place the Bridge unit on the Output tray and slide the unit along the output
part of the printer.
Fig. 4-79