Brother HL-3260N - Manual (Page 176)

CHAPTER 4 OPTIONS
4-53
☛ ☛ ☛ ☛ 7.
Hold the Finisher with both hands and keep it horizontal. Align the holes of
the Finisher over the brackets of the Finisher stand and then push it
downwards slightly.
✒
Note
• If you do not keep the Finisher horizontal, you can not install it correctly.
In this case, remove the Finisher and reinstall it.
Fig. 4-90
☛ ☛ ☛ ☛ 8.
Insert the Finisher tray into the hole of the Finisher(
①).
1
Fig. 4-91