Brother HL-3260N - Manual (Page 155)

4-32
☛ ☛ ☛ ☛ 5.
Remove the two screws holding the cover on the right hand side of the
printer using the Allen key and remove the cover.
✒
Note
The two removed screws and the cover are no longer required.
ZAEP510E
Fig. 4-51
☛ ☛ ☛ ☛ 6.
Fit the brackets of the holder into the slots in the printer and push downward
slightly.
ZAEP210E
Fig. 4-52
☛ ☛ ☛ ☛ 7.
Use the Allen key to fasten the four screws in the order shown in the
illustration (
①-④) to secure the holder to the printer.
ZAEP660E
Fig. 4-53