Brother HL-3260N - Manual (Page 141)

4-18
☛ ☛ ☛ ☛ 11.
Open the upper right cover (
①) of the Interchange unit and slide the
Interchange unit to the left while keeping the Upper cover right
perpendicular to the printer (
②). Confirm that the projection (③) locates in
the hole as shown in the illustration.
1
3
1
2
Fig. 4-26
☛ ☛ ☛ ☛ 12.
Fasten the two screws finger tight and secure the Interchange unit to the
printer. Use a coin to tighten the screws.
ZAEP161E
Fig. 4-27
☛ ☛ ☛ ☛ 13.
Close the Upper right cover of the Interchange unit.
ZAEP162E
Fig. 4-28